Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 9 Aug 2001 17:17:16 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Rick,
If it's really gold plating, our experience has been that you will
definitely get a 'grayish' dull finish due to dissolution of the gold into
the solder. The bigger concern should probably be the brittleness of the
joint due to the tin/gold intermetallics that are formed. While immersion
gold may exhibit some of this behavior, the fact that it's an extremely thin
layer should minimize the 'dulling' visual effects you see. If you really
have immersion gold boards it might be wise to check the thickness of the
gold if you're seeing significant dulling.
Regards,
Rick Thompson
Ventura Electronics Assembly
2655 Park Center Dr.
Simi Valley, CA 93065
+1 (805) 584-9858 x-304 voice
+1 (805) 584-1529 fax
[log in to unmask]
-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Rick Howieson
Sent: Thursday, August 09, 2001 1:53 PM
To: [log in to unmask]
Subject: [TN] Gold/Paste
We are seeing cloudy/grayish smt solder joints on boards with immersion gold
or soft body gold plating. Is this common???
Thanks,
Rick
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|