Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Sun, 28 Oct 2001 10:41:49 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Take the capacitors off, do your thing, then put them back.
Dorothy Lush
> ----------
> From: John Fahey[SMTP:[log in to unmask]]
> Reply To: TechNet E-Mail Forum.
> Sent: Tuesday, October 23, 2001 9:04 AM
> To: [log in to unmask]
> Subject: REPOST: Through Hole Oscillator Removal
>
> Good Morning.
>
> I have a PCB assembly where I need to remove a 4 pin through hole
> oscillator and replace it with a different date code. (@5K units)
>
> AirVac recommends that this removal be done by heating the bottom side via
> a solder pot system to reflow the solder, remove the component, and
> replace
> it with a new one.. Unfortunately, there are 3 capacitors on the bottom
> side which lie in the vicinity of the through hole leads which would
> necessitate a specially designed Nozzle.
>
> Does anyone have ANY other advice/recommendations for a system to
> remove/replace through hole components from a PCBA. I am particularly
> interested ina ny systems that can be leased as this is a one time usage
> requirement.
>
> As always, I appreciate your excellent advice.
>
> Rgds, John
>
> --------------------------------------------------------------------------
> -------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt delivery of Technet send the following message: SET
> Technet NOMAIL
> Search previous postings at: www.ipc.org > On-Line Resources & Databases >
> E-mail Archives
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
> ext.5315
> --------------------------------------------------------------------------
> -------
>
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|