Mime-Version: |
1.0 |
Sender: |
|
Date: |
Thu, 4 Oct 2001 10:22:52 -0400 |
Reply-To: |
|
Subject: |
|
From: |
|
X-cc: |
|
In-Reply-To: |
|
Content-Type: |
text/plain; charset="us-ascii" ; format="flowed" |
Parts/Attachments: |
|
|
Thank you Steve! Looks like we may be on the right track, hopefully
we can get a couple more suggestions for the technetters.
Hi Sherry,
I've posted the footprint of your uBGA up on my web page, I took the
image and made a *.jpg out of it instead of a *.pdf...I called the
image microBGA footprint.
Go to: http://www.stevezeva.homestead.com/
I had something similar to your problem a couple of years ago...except in my
situation there was a trace running between the two pads. So I had to
dig a little
"tunnel" beneath the trace, and connected the two pads with a piece of trace
material. This was on a uBGA as well...
Good Luck!!
-Steve Gregory-
>Steve,
>
>Hope you can help us. I don't think technet will allow attachments,
>I know I can't receive them.
>
>I attached a pdf file of the package outline data sheet for a uBGA we
>attached to a FR4 pcb. Everything worked wonderfully through our
>reflow process. Then the designer found an error in the board layout.
>E3 should have been tied to E4 (active) but wasn't, it is a dead pad
>under the component. In order to get a temporary fix, the best
>solution that we can think of is to remove the part, remove the mask
>between the two pads on the board and apply conductive epoxy.
>Purchase a micro mini-stencil (5 mil) for paste application and
>reflow/attach a new component.
>
>Still in the learning stage and would welcome suggestions, there
>hasn't been much BGA use here on-site until recently.
>
>Thank you,
>Sherry
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|