Sender: |
|
Subject: |
|
From: |
|
Date: |
Tue, 30 Oct 2001 12:45:27 -0500 |
Content-Type: |
text/plain; charset="iso-8859-1" |
MIME-Version: |
1.0 |
Reply-To: |
|
Parts/Attachments: |
|
|
My experience has been that the pot definitely does stratify. A couple of
years ago, we failed a solder analysis (not even close to the requirements).
When we started asking questions, it turned out that the operator dipped
shallow from a static 800 pound pot. We ran the wave for 15 minutes and
dipped deeper - presto, the solder pot passed with its usual numbers. After
that, we beefed up the work instructions for taking samples.
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|