TECHNET Archives

September 2001

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Phil Nutting <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Tue, 4 Sep 2001 08:49:33 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (53 lines)
Tamir,

I don't know of any standard, but that's not to say there isn't one.
Hopefully some of the other Technetters have this information.  I can
tell you that with our through hole design boards, right or wrong, we
typically put components as close to the edge as possible, but not so
close that the V-score cuts the solder pads.

It is not scientific but it works for us.

Phil Nutting

-----Original Message-----
From: Tamir Ben Shoshan [mailto:[log in to unmask]]
Sent: Monday, September 03, 2001 8:03 AM
To: [log in to unmask]
Subject: [TN] Distance from V-cut


Hello,

Is there any recommendation for the distance between a component and the
V-cut edge?

Thanks, Tamir B. Shoshan.

------------------------------------------------------------------------
---------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases
> E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
------------------------------------------------------------------------
---------

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

ATOM RSS1 RSS2