All,

We use a solder dross recovery system which has recently resulted in some
debate for which I would like your comments / opinion.

What percentage of solder entering a wave soldering machine comes out as
dross?

I realise this will be dependant on machine type, how it is run, temperature
etc. etc. but on a well maintained machine running product for 8hrs a day
what would people's experience tell them could be expected.

I look forward to your replies.

I have heard everything from 20% to 70% so far!!!!!

Thanks,

Neil
Neil Atkinson - Quality Manager

Stadium Electronic Controls Division

Stephen House, Brenda Road, Hartlepool TS25 2BQ (UK)




#####################################################################################
Attention:

This message is for the named person's use only.  It may contain confidential,
proprietary or legally privileged information.  No confidentiality or privilege
is waived or lost by any mistransmission.  If you receive this message in error,
please immediately delete it and all copies of it from your system, destroy any
hard copies of it securely and notify the sender.  You must not, directly or
indirectly, use, disclose, distribute, print, or copy any part of this message
if you are not the intended recipient. STADIUM GROUP PLC and any of its subsidiaries
each reserve the right to monitor all e-mail communications through its networks.
Any views expressed in this message are those of the individual sender, except where
the message states otherwise and the sender is authorised to state them to be the
views of Stadium Group Plc. or one of its subsidiaries.

Although this message has been scanned by MailMarshall for known viruses and
inappropriate content, we recommend that recipients employ appropriate measures on
their systems to intercept any such material.

Thank You - Stadium Group Plc., IT Department - Tel: +44 (0)1429 266544
#####################################################################################

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------