Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 29 Aug 2001 15:52:11 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi All,
Our most recent HAL solder analysis report showed tin at 61.17% (report
spec is 61.5 - 63.5) and gold at 0.055% (report spec is 0.045%).
We're replacing the solder, but I'm wondering about the solderability of
boards that have already been processed. Will these levels not, possibly,
or certainly cause soldering problems?
Thanks,
Mark
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|