You could have a bad batch of paste, or it could have expired.

Guy Ramsey
Senior Lab Technician / Instructor


E-Mail: [log in to unmask] <mailto:[log in to unmask]>
Ph: (610) 362-1200 x107
Fax: (610) 362-1290



-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Jorge Rodriguez
Sent: Tuesday, August 21, 2001 2:57 PM
To: [log in to unmask]
Subject: [TN] Solder Beads (not solder balls)


Fellow technetters,

We are having tons of issues with solder beading, even on boards were we
didn't have the issue before. We're clueless, we suspect of the solder paste
(63-37 Water Soluble), it looks slumpy amd watery, but we're not sure. I
know solder beading can be solved by designing the stencils with home-base
aperture, but what we're seeing here is across the board, not just one
particular assembly but several. Does anyone have experience dealing with an
issue like this?, could solder beading caused by the oven profile or is it
more like solder paste related?


Any comments would be appreciated.


Jorge Rodriguez
Process Engineer
Varian Electronics Manufacturing
E-mail: [log in to unmask]

----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------