Mike
The tooling on the press that you use to mash the particular PEM nut
[http://www.pemnet.com/fastening_products/prod_desc.php3?cat=Fasteners+for+P
C+Boards] on to your board has more to do with your keepout than most other
things.
Dave Fish
----- Original Message -----
From: Mike Cussen <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, July 05, 2001 12:04 PM
Subject: [TN] Pemnuts
> Is there a standard for the keep-out area around a pemnut un-plated hole?
>
> Material = FR4
> Thickness = 0.0625"
> Layers = 4
>
> --------------------------------------------------------------------------
-------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
> Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
> --------------------------------------------------------------------------
-------
>
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------