Hi everybody,
        We start using a waverider for monitoring two wave soldering machine. We
have made some pretest run during one month. Our main concern is about the
parallelism and the immersion depth of the solder. The parallelism is
between -0.2 sec et 0.4 sec ( main wave ) and the immersion depth is between
1.47 mm and 1.93 mm. Our main question is about the variation we see not the
absolute value. We have a standards deviation of 0.2 sec for the parallelism
and 0.12 mm for the immersion depth. Since we have no real point of
comparaison, we are unable to say if this it's ok or too much.  We want to
know if other person use the waverider and which variation do you read from
the immersion depth and the parallism of the wave solder. Thank you.


Julien Bouchard ing. stag.
Matrox - Spécialiste de procédés

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------