Hello All,
An engineering mistake at the PCB fabricator caused a deviation at the
drilling size of some press fit connectors (the tools were designed to HAL
when the coating was Ni-Gold). I wonder if an addition selective HAL on the
component's area (with the NI-Au) can be implemented and still stay with
high reliability boards (with reference to the brittle intermetalics alloy
that can be formed with time at that area). I have to say that those bare
boards are very expensive and complicated(28 layers, 18"x18")
Tamir B. Shoshan
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------