TECHNET Archives

June 2001

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Stephen R. Gregory" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Tue, 5 Jun 2001 21:04:32 EDT
Content-Type:
text/plain
Parts/Attachments:
text/plain (59 lines)
Hey Moonman!

'Kay, all the pictures are up!! Go to:

http://stevezeva.homestead.com/index.html

I think I was a little off when I said 15-minutes...I forget that I don't
have a T1 line at home like I do at work! 56k modems aren't quite as fast as
a T1...plus you don't get bumped off Ti's like you do on AOL
dial-ups...hehehe.

But they're there now, all the pictures are labeled ESD/EOS damage...GREAT
pictures Earl!! Wish I knew enough about this stuff to offer some
input...it'll be a real learning experience to hear from those that do!!!

-Steve Gregory-

<< Folks,

 In this message, I ask Steve to tell me his requirements for posting
 pictures to his site. The photos show component failure at my new contract
 company.

 Of primary concern is ESD/EOS failure. Also of concern is excessive thermal
 excursions and the inability, possibly to get the heat out. Some reasons for
 this conclusion involve coplanarity issues not allowing intimate contact
 with the heat sink and the company's requirement of not filling the void
 with thermal goop. Too messey they say.

 My humble conclusion is the part is too ESD/EOS sensitive for the commercial
 assembly operation hired to do the job. Contributing to the many failures is
 the the thermal issue.

 I appreciate any input from you component failure analysis folks. If you've
 seen anything like this before, please let me know.

 For now, this issue is secret with respect to the supplier (guess who as a
 GaAs amplifier supplier) and the customer for it (my employee). Their
 customer is one of the folks involved with, what else, broadband
 communications.

 The photos will be presented on Steve's site with his permission and
 procedures. This might not happen until tomorrow, depending on available
 time and resources.

 Thanks,

 MoonMan >>

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

ATOM RSS1 RSS2