TECHNET Archives

June 2001

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Charles Lawson <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Tue, 5 Jun 2001 16:41:04 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (41 lines)
Kevin,

I would like to add one caveat about using 610 for
acceptability.  According to paragraph 1.2 of IPC-A-610C, to apply and use
the content of 610, the assembly/product should comply with other existing
IPC requirements such as IPC-SM-782, IPC-2221, IPC-6011 and IPC-A-600 (or
equivalent requirements).  If not, then the acceptance criteria needs to be
defined between the customer and supplier.  I am not familiar with
polyimide boards, but wonder if these would be covered.

Charles Lawson
Product Assurance
General Dynamics Advanced Technology Systems

>From: PERALTA, Kevin (BREA) [mailto:[log in to unmask]]
>Sent: June 5, 2001 9:41 AM
>To: [log in to unmask]
>Subject: Re: [TN] Measling...
>
>
>
>Hey Joyce! Don't go to far out there. Remember "Inspect to Accept"!
>Since there is only "Acceptable" criteria mentioned in the 610 document,
>I would suggest to Steve to perform a dielectric resistance test to ease
>his mind. Unless heat is going to be applied to the board again, the
>condition probably won't progress.
>
>Kevin L. Peralta
>Senior Quality Systems Analyst
>TRW Aeronautical / Lucas Aerospace

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

ATOM RSS1 RSS2