Graham:

Just reading all the reponses so far sounds like a lot of work for a
relatively short time period. What about leaving everything the way it is
and ask people to come in after the sun goes down. (Or start real early like
at 3:00 AM) This way folks get to enjoy the hot weather, eat Lobsters, and
work when its a little cooler.

Of course, if your operation runs around the clock then another alternative
is necessary.

Bill Kasprzak
Moog Inc., Electronic Assembly Engineering


> -----Original Message-----
> From: Graham Naisbitt [SMTP:[log in to unmask]]
> Sent: Monday, June 25, 2001 6:27 PM
> To:   [log in to unmask]
> Subject:      [TN] Its too darn hot to work
>
>
>
> Hello Techies,
>
> I wonder if anyone can come up with some good ideas for our little
> problem:
>
> We now have a heatwave with the temperature at over 30 DegC in the shade
> that's 86 in old money.
>
> Our conformal coating room which is 10,000 cubic feet (that's 283.17 in
> new money) is extracted at 5000 cubic feet per minute = 30 exchanges per
> hour.
>
> The problem is, I cannot easily chill that amount of air without incurring
> the wrath of the Euro-Environmental Lobby (we call them Eels! If you need
> to figure out why, then you need to get out more)
>
> Can anyone suggest a novel, but effective way I can chill my staff - apart
> from freezing their wages of course!
>
> What a year, first we drown then we cook - yours in anticipation Larry the
> Lobster.
>
> RegardsRegards, Graham Naisbitt
>
> [log in to unmask]
> http:// www.concoat.co.uk <http://www.concoat.co.uk/>
>
> For instant access to Product Data Sheets register on the Tech-Shot area
> of http:// www.concoat.co.uk <http://www.concoat.co.uk/>
>
> Concoat Limited
> Alasan House, Albany Park
> CAMBERLEY GU16 7PH UK
> Phone: +44 (0)1276 691100
> Fax: +44 (0)1276 691227
> Mobile: +44 (0)79 6858 2121
>

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------