TECHNET Archives

June 2001

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Ryan Grant <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Mon, 25 Jun 2001 18:00:45 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (88 lines)
Graham,

30 deg C is too hot?  I supposed it all depends on the humidity.  Here is
the desert, that is perfect outside weather.

Are you in a position to spend money?  (I know, Bad question).  I've had a
passing interest in an air exchanger for my house.  (I haven't purchased one
yet because energy had been so cheap, maybe I should start looking again).
With super insulated homes, air exchanges occur so seldom that there is
danger of asphyxiation, not unlike your coating room.  However, exchanging
air defeats the point of super insulating a house.  Thus, air exchangers
that transfer the conditioning of hot or cold air from the house to the
incoming air from outside have been developed.  I have seen some that are
passive without moving parts except for the fan to move the air.  I don't
know if the technology has been developed for industrial use; nor have I
performed enough research to convince myself that it works; but it might.
(You will have to do the research).

Another passive technique is to put the building in the shade, artificially
of course.  Imagine hundreds of picnic umbrellas on your roof and you will
get the picture.  Naturally, building a suspended roof over your existing
roof will cost dollars, or in your case, pounds.

Or....
Can you make your high exchange rate just in the areas that need it.  For
example, hand solder stations sometimes have individual vents just at that
station to capture the fumes, rather than drawing the whole factory air
away.

Or...
6:00..way past quitting time...sorry I gotta go

Ryan Grant

> -----Original Message-----
> From: Graham Naisbitt [SMTP:[log in to unmask]]
> Sent: Monday, June 25, 2001 4:27 PM
> To:   [log in to unmask]
> Subject:      [TN] Its too darn hot to work
>
> Hello Techies,
>
> I wonder if anyone can come up with some good ideas for our little
> problem:
>
> We now have a heatwave with the temperature at over 30 DegC in the shade
> that's 86 in old money.
>
> Our conformal coating room which is 10,000 cubic feet (that's 283.17 in
> new money) is extracted at 5000 cubic feet per minute = 30 exchanges per
> hour.
>
> The problem is, I cannot easily chill that amount of air without incurring
> the wrath of the Euro-Environmental Lobby (we call them Eels! If you need
> to figure out why, then you need to get out more)
>
> Can anyone suggest a novel, but effective way I can chill my staff - apart
> from freezing their wages of course!
>
> What a year, first we drown then we cook - yours in anticipation Larry the
> Lobster.
>
> RegardsRegards, Graham Naisbitt
>
> [log in to unmask]
> http:// www.concoat.co.uk <http://www.concoat.co.uk/>
>
> For instant access to Product Data Sheets register on the Tech-Shot area
> of http:// www.concoat.co.uk <http://www.concoat.co.uk/>
>
> Concoat Limited
> Alasan House, Albany Park
> CAMBERLEY GU16 7PH UK
> Phone: +44 (0)1276 691100
> Fax: +44 (0)1276 691227
> Mobile: +44 (0)79 6858 2121
>

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

ATOM RSS1 RSS2