Subject: | |
From: | |
Reply To: | |
Date: | Tue, 19 Jun 2001 10:41:39 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Genny -
As a general rule, mixing flux chemistries can be anywhere from a very
benign to a very difficult situation. It can run the gamut. You really
should test the residues left after cleaning both for ionic contamination
and Surface Insulation Resistance (SIR) as a minimum. Either way, with the
RA flux you need to clean the boards.
Ed Valentine
Electronics Manufacturing Solutions
8612 Mourning Dove Road, Raleigh, NC 27615
Phone: (919) 270-5145, Fax: (919) 847-9971
Email: [log in to unmask]
Website: http://www.ems-consulting.com
----- Original Message -----
From: "Genny Gibbard" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, June 18, 2001 1:24 PM
Subject: [TN] No Clean and Rosin core on same PCB
> Hello,
> We have CM's that use no-clean solder paste on our PCB's. We have not
given
> the CM any spec other than that it be approx. 60/40 tin-lead. In house,
> however, for hand assembly we have always used solder such as Kester "44"
RA
> core solder. We're working on a new OEM product and the customer has
> expressed concerns about mixing the two on the same PCB. We also use a
> safety wash board cleaner.
> Any thoughts or concerns that we should address?
>
> Genny Gibbard (mailto:[log in to unmask])
> Product Transition and Support
> Wavecom Electronics Inc.
>
> --------------------------------------------------------------------------
-------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
> Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
> --------------------------------------------------------------------------
-------
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|