TECHNET Archives

June 2001

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Eric Dawson <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Mon, 18 Jun 2001 16:33:27 +0100
Content-Type:
text/plain
Parts/Attachments:
text/plain (56 lines)
Hi Rob,
I don't know what adhesive you are trying to remove, but assuming that you
have a solvent for it, try connecting the nozzle, in line, into a
recirculating peristaltic pump/reservoir system. If the nozzle can be
immersed in an ultrasonic bath at the same time, so much the better.
You should be able to buy, at reasonable cost, a system from John Hall in
Haverhill, Suffolk, UK, (0)1440 730475.
Hope this helps
Regards
Eric Dawson
CCT, Colchester, UK

> -----Original Message-----
> From: Rob Day [SMTP:[log in to unmask]]
> Sent: 18 June 2001 13:09
> To:   [log in to unmask]
> Subject:      [TN] Glue Nozzle Cleaning
>
> Hello Folks,
>
> We have some glue nozzles that are very dirty.  We were wondering if there
> was a different way of cleaning them besides sending them out (called a
> couple of vendors but they would not quote site unseen) or spending money
> for a kit that may not work.  Any input would be greatly appreciated.
>
>
> Thanks,
>
> Rob Day
>
> --------------------------------------------------------------------------
> -------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt delivery of Technet send the following message: SET
> Technet NOMAIL
> Search previous postings at: www.ipc.org > On-Line Resources & Databases >
> E-mail Archives
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
> ext.5315
> --------------------------------------------------------------------------
> -------

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

ATOM RSS1 RSS2