Solder paste can be dispensed quite well from these systems provided that
proper attention is paid to correctly specifying the material. Solder pastes
are inherently more difficult to dispense than adhesives but if particle
size range [and distribution in the specified range] is correctly done with
the right vehicle rheology, consistent dispense at quite high rates is
achievable.
Mike Fenner
Indium Corporation of Europe
www.indium.com
-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of <Peter George Duncan>
Sent: Tuesday, June 12, 2001 1:04 AM
To: [log in to unmask]
Subject: Re: [TN] Looking for a "special" solder paste dispenser
Hi, Craig,
You could try Asymtek, part of the Nordsen group, which specialises in
fluid dispensing technology. They seem to be the market leaders. They do
underfill, adhesive and flux dispensers, and though I haven't seen a solder
paste dispenser in their list, they may do one. Or try EFD - they do have
a paste dispenser, but you'll need to decide its accuracy for yourself.
Pete Duncan
Craig Hillman
<chillman@CALC To: [log in to unmask]
E.UMD.EDU> cc: (bcc: DUNCAN Peter/Asst
Prin Engr/ST Aero/ST Group)
Sent by: Subject: [TN] Looking for a
"special" solder paste
TechNet dispenser
<[log in to unmask]
RG>
06/11/01 08:05
PM
Please respond
to "TechNet
E-Mail
Forum.";
Please respond
to Craig
Hillman
Hello Technetters,
For research and development purposes, I am looking for a machine that
dispenses solder
onto a board WITHOUT the use of a solder stencil. The speed is not as
important as accuracy and
quality of work.
Do you know of a machine like this? If so, how can I find one?
Thanks for your help,
Craig
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|