Subject: | |
From: | |
Reply To: | DesignerCouncil E-Mail Forum. |
Date: | Thu, 21 Jun 2001 08:14:03 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
If you specify the desired finished conductor thickness (base + plating)
AND the desired minimum plating in the holes, the boardshop can make it so,
unless you specify something goofy - in which case they will call you and
tell you why they can't.
My 2 cents,
-Chris Ball
=========================================
>Something to remember though, is a .0014" external plating
>will not result in a .0014" hole plating. the plating
>in the hole is somewhat reduced. Either specify the
>hole wall plating thickness and don't specify the external
>plating, or specify the external and let the fabricator
>account for the hole plating.
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To set a vacation stop for delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|