Content-Type: |
text/plain; charset="iso-8859-1" |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Mon, 18 Jun 2001 08:35:23 -0400 |
MIME-Version: |
1.0 |
X-To: |
|
Reply-To: |
|
Parts/Attachments: |
|
|
Check your venting, esp if your machines are sharing a vent to the outside.
Perhaps you have a fan that is no longer working, or a vent that someone
accidentally shut.
Also, in a past life, we had a similar problem during the onset of the
hotter weather- line operators were setting up powerful fans to cool off,
without realizing the consequences of having a fan blowing directly into a
wave solder machine or reflow oven. If they've done the same thing at your
place, you've probably got a few other problems as well.
-----Original Message-----
From: Lon Weffers [mailto:[log in to unmask]]
Sent: Friday, June 15, 2001 6:35 AM
To: [log in to unmask]
Subject: [TN] clean air
Dear technetters,
Recently we have some problems with our breething air inside the building.
Some of us think its due to the outgassing of the just soldered pcb's,
others think it is the flux.
Main problem occurs in front of the soldering machines and the reflow oven.
There is now a discussion going on about the safeness of fluxes and
soldering (pastes).
My question is if someone had the same problems and what did they do to
reduce these problems?
Lon Weffers
Matas Electronics bv
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|