Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 23 May 2001 10:02:43 +0300 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
The key factor when spraying a conformal coating is that the air used
must be absolutely clean. I recommend bottled nitrogen as being
non-reactive (some coatings can react with oxygen when finely divided).
Above all, do NOT use shop compressed air unless you are 999% sure that
it is perfectly clean, dry, oil- and particle-free, which is
**extremely** difficult to achieve (and very expensive to do so).
Brian
[log in to unmask] wrote:
>
> I hope this one gets though. First thanks to all for the help you have given and
> the education I receive from the Technet. I have trouble responding in kind, our
> e-mail doesn't always let me reply.
> Now the question. Does anyone spray Solithane 113 conformal coat? We are
> currently brushing with it, but I have been asked to spray. Is there any special
> info I should know? We spray manually with a paint gun or an airbrush.
> Thanks again ( especially my last question- soldering to stainless steel )
> Fortunately I won't have to do that after all.
>
> Charles Caswell
> Process Lead, PCB
> Frontier Electronic Systems
>
> ---------------------------------------------------------------------------------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
> Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
> ---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|