Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Mon, 2 Apr 2001 07:54:12 +0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi, Bob,
IPC-A-610 shows how lacing card should be tied, but if you're in any doubt
(and were a good boy scout), each knot should be a clove hitch with a reef
knot tied over the top. For added security (not absolutely necessary), burn
the loose ends short with a soldering iron and cover the knot with a
suitable varnish.
For tying things like IC's down, I recommend you have a double thickness of
cord going round the component body, and make sure each turn is pulled up
tight i.e. make sure the cord isn't at an angle that will slip and become
loose, before doing the clove hitch.
Hope this helps.
Pete Duncan
Asst Principal Engineer
ST Aerospace
bbarr
<bbarr@FORMAT To: [log in to unmask]
ION.COM> cc:
Sent by: Subject: [TN] Lacing Tape
TechNet
<[log in to unmask]
ORG>
03/30/01
10:29 PM
Please
respond to
"TechNet
E-Mail
Forum.";
Please
respond to
bbarr
Not exactly a high-tech question, but...could anybody point me to a
document, web site, etc. that shows the proper method for tying lacing cord
knots? Our customer wants us to tie down socketed ICs with lacing cord. I
have been away from defense work too long to remember where this info came
from.
Thanks.
Bob
Robert Barr
Manufacturing Engineering
Formation, Inc.
Voice: 856-234-5020 x3035
Fax: 856-234-6679
email: [log in to unmask]
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|