TECHNET Archives

April 2001

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Seth Goodman <[log in to unmask]>
Reply To:
Date:
Wed, 11 Apr 2001 11:44:25 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (29 lines)
The CAM350 product has some capabilities to do reverse engineering from
Gerber files.  They can produce data files for several different types of
CAD software.  This may prove more useful to you in getting out from under
your legacy problem.  The vendor for CAM350 is Advanced CAM Technologies in
sunny California, though they have been purchased by PADS who in turn was
purchased by Innoveda.  Hard to keep track of who's who anymore.  If this is
a one-time thing and you don't want to buy/learn new software, there are
service bureaus that can do the reverse engineering for you from the
Gerbers.

Regards,

Seth Goodman
Goodman Associates
Verona, WI 53593
tel    (608)833-9933
fax    (608)833-9966
mobile (608)213-8533

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

ATOM RSS1 RSS2