Sender: |
|
X-To: |
|
Date: |
Tue, 24 Apr 2001 12:28:05 -0400 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
quoted-printable |
Content-Type: |
text/plain; charset="iso-8859-1" |
From: |
|
Parts/Attachments: |
|
|
Stephan,
One more thought, be carefull in connector picking,
pending what type of connector tip&rng may be going out on,
you may have to have uninstalled pins, and no pads on those pins
if other siganls are part of this connector, Also pending
connector you may be able to get away with pins installed
but a no pad non-plated hole. All conductive material nees the 2.5mm
space.
Bob Wolfe
Lucent
-----Original Message-----
From: Stéphan Renaud [mailto:[log in to unmask]]
Sent: Monday, April 23, 2001 1:52 PM
To: [log in to unmask]
Subject: [DC] UL-1950 certification
We need to get the UL-1950 spec. certification for one of our products.
We are in the process of purchassing the specs but it would be greatly
apreciated if meanwhile anyone of you could give us some information on what
design rules to follow on the pcb (spacing needed for ring voltage, ring
start, -48v, etc.).
Again, we appreciatte all the help. Thanks.
Stephan Renaud
Product Designer
----------------------------------------------------------------------------
-----
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV
1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To set a vacation stop for delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To set a vacation stop for delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|