Hi Bill,

Take a look at this site.
http://www.veco.storkgroup.com/products/3_smt.html


Here's a shortcut to their agents.
http://www.veco.storkgroup.com/products/stencils/3_smt_agents.html




Best Regards,

Jowan Iven
Process Engineer Manufacturing

Stork Electronics B.V.




-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Kasprzak, Bill (sys)
USX
Sent: Wednesday, March 07, 2001 14:29
To: [log in to unmask]
Subject: [TN] Standard Sizes for Screen Printers


To all tech netters:

I need some help trying to determine what "standard" frame sizes are for
screen printers. Up to this point all of our board designs were on the small
size and a 12" by 12" frame generally would suffice for our needs.

The "industry" tends to use the inside frame dimension for the size call
out. So, my 12" by 12" frame is actually a 14" X 14" frame when the outside
dimensions (OD) are measured. So then, is it still true that frame sizes are
called out by their inside frame dimensions?

We have a circuit board design that measures 10" by 19". From my research,
this board requires a 24" X 24" frame (OD 27" X 27"). This is because a
stencil of this size  uses a foil size of 19" X 19". This foil size will fit
the stencil openings that I require. Any  "standard" frame sizes smaller
will not fit the pattern we need to stencil.

In addition, we'll need a new screen printer. This one particular model
we're considering states that it can handle a frame size of up to 24.8" by
33.4". The rep for this model checked with the manufacturer and they told me
that any stencil manufacturer will make a stencil frame to fit the machine
and thereby accommodate this board size.
The frame shouldn't be any more expensive. I'm saying that this machine will
only handle a 20" X 20" "standard" frame size. I cannot find a standard
frame or any frame that will fit into the 24.8" X 33.4" opening.

My questions are:

1) Is there a frame that fits this 24.8 X 33.4 opening?
2) If there is a frame, is it considered a "standard" size?
3) Are there extra costs associated with getting a frame of this size?

Any info, websites to look at, or any other response will be greatly
appreciated!

Bill Kasprzak
Moog Inc.

----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------