 
| Subject: | |
| From: | |
| Reply To: | TechNet E-Mail Forum. |
| Date: | Wed, 7 Mar 2001 06:47:53 -0700 |
| Content-Type: | text/plain |
| Parts/Attachments: |
|
|
Try these people http://www.photo-stencil.com/ I think they can answer any
of your questions.
Photo Stencil
4725 Centennial Blvd.
Colorado Springs, CO 80919
Phone: (719) 599-4305
Fax: (719) 599-4334
E-mail: [log in to unmask]
(files only)
FTP: photostencil.com
(anonymous login)
E-mail: [log in to unmask] (messages only)
Website: www.photostencil.com
Steve Collins
"Kasprzak,
Bill (sys) To: [log in to unmask]
USX" cc:
<bkasprzak@MO Subject: [TN] Standard Sizes for Screen Printers
OG.COM>
Sent by:
TechNet
<[log in to unmask]
ORG>
03/07/01
06:28 AM
Please
respond to
"TechNet
E-Mail
Forum.";
Please
respond to
"Kasprzak,
Bill (sys)
USX"
To all tech netters:
I need some help trying to determine what "standard" frame sizes are for
screen printers. Up to this point all of our board designs were on the
small
size and a 12" by 12" frame generally would suffice for our needs.
The "industry" tends to use the inside frame dimension for the size call
out. So, my 12" by 12" frame is actually a 14" X 14" frame when the outside
dimensions (OD) are measured. So then, is it still true that frame sizes
are
called out by their inside frame dimensions?
We have a circuit board design that measures 10" by 19". From my research,
this board requires a 24" X 24" frame (OD 27" X 27"). This is because a
stencil of this size uses a foil size of 19" X 19". This foil size will
fit
the stencil openings that I require. Any "standard" frame sizes smaller
will not fit the pattern we need to stencil.
In addition, we'll need a new screen printer. This one particular model
we're considering states that it can handle a frame size of up to 24.8" by
33.4". The rep for this model checked with the manufacturer and they told
me
that any stencil manufacturer will make a stencil frame to fit the machine
and thereby accommodate this board size.
The frame shouldn't be any more expensive. I'm saying that this machine
will
only handle a 20" X 20" "standard" frame size. I cannot find a standard
frame or any frame that will fit into the 24.8" X 33.4" opening.
My questions are:
1) Is there a frame that fits this 24.8 X 33.4 opening?
2) If there is a frame, is it considered a "standard" size?
3) Are there extra costs associated with getting a frame of this size?
Any info, websites to look at, or any other response will be greatly
appreciated!
Bill Kasprzak
Moog Inc.
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|
