TECHNET Archives

March 2001

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Marty Brooks <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Wed, 28 Mar 2001 13:41:17 -0800
Content-Type:
text/plain
Parts/Attachments:
text/plain (42 lines)
We are experiencing a concerning variation from board to board in the
performance of our RF product.  We have investigated several causes of the
problem and are currently of the opinion that soldering quality of the
transceiver chip is the most significant contributing factor.  As an
example, on the last run of prototypes that was manufactured, the signal
frequency was at the upper limit of the allowable range.  We removed and
replaced the transceiver chip in-house and decreased the frequency closer to
what we would expect.

I'm going to be making a visit to our contractor's facility next week to
investigate this problem and would like some feedback on possible causes or
process controls that I should look into.

The board is 4 layers, HASL finish, single side smt, solder paste used is
Alpha's UP78 no-clean.  The transceiver chip is a 20-pin device with
terminations flush along the bottom of the component.

Thanks for any advice.

Marty Brooks
Manufacturing Engineer
IDENTEC Solutions, Inc.
102, 1860 Dayton Street
Kelowna, B.C., Canada V1Y 7W6
Ph:(250)860-6567, Fax:(250)860-6541
www.identec.com

This email contains confidential information and is intended for the sole
use of the addressee. Any other distribution, copying or disclosure is
strictly prohibited. If you are not the addressee, please notify the sender
by email and delete this message.

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

ATOM RSS1 RSS2