TECHNET Archives

March 2001

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Noble, Ed" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Thu, 15 Mar 2001 15:23:41 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (36 lines)
Hello Fellow Netters,

        Here's a recipe for a soldering nightmare.  We're developing a
process that involves the following materials, but not having very good
success with attaining an 'acceptable' solder joint.

        Lap soldering a .4 mil dia platinum wire to the top of a .040" dia
kovar post using indium solder (60% indium/40% lead).  Additional info:  the
kovar post has a nickel coat 200 micro inches, then 30 micro inches of hard
gold plating.

        One issue:  indium solder does not wet to tip of iron and platinum
wire (tip temp is at 670F)
        Second issue: If we use zinc chloride as a fluxing agent, the end
solder is better, but we would rather stay away from using this flux (too
corrosive).

        Does this challenge anyone out there?  We'd appreciate any and all
feedback.

Process Control Supervisor
[log in to unmask]
Industrial Scientific Corp.
www.indsci.com
voice  412.490.1884

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

ATOM RSS1 RSS2