Content-Type: |
text/plain; charset="iso-8859-1" |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Fri, 2 Mar 2001 14:16:47 -0500 |
MIME-Version: |
1.0 |
X-To: |
|
Reply-To: |
|
Parts/Attachments: |
|
|
Hi Earl-
No experience with them, but there are some new dispensers out that are
capable of placing a dot on top of a dot, "shooting" it into position- the
mfg name escapes me.
In theory, this should take up less room under the part, but still doesn't
address the root of the problem- reflowing paste and curing glue at the same
time- the respective needs are too different and leads to the glue/paste
problems we all know and love.
If you could combine the new dispenser with a glue that cures at a temp
closer to reflow, bingo. Screen printing paste should work well too, but
can be a pain if you don't have a spare printer sitting around.
Here's hoping & good luck-
Bill C
-----Original Message-----
From: Earl Moon [mailto:[log in to unmask]]
Sent: Thursday, March 01, 2001 6:25 PM
To: [log in to unmask]
Subject: Re: [TN] RFU2
Steve.
I'll try anything and have done most but I still keep seeing epoxy in solder
joints because of tight spacing and lack of registration. How small a glue
dot can be printed/dispensed and registered without encroaching on SMT
pad/solder joint, etc.? I still have x-section nightmares bouncing around.
Thanks,
Earl
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|