TECHNET Archives

February 2001

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Darrel Therriault <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Wed, 7 Feb 2001 07:17:54 -0800
Content-Type:
text/plain
Parts/Attachments:
text/plain (51 lines)
Ken,

IPC7721 section 4.2 shows several repair methods.  You might check it out to
see what works best for
your situation.

DT

-----Original Message-----
From: Ken Patel [mailto:[log in to unmask]]
Sent: Tuesday, February 06, 2001 5:26 PM
To: [log in to unmask]
Subject: [TN] Is it acceptable trace rework?


Guys,
Initially, we had a trace cut and then we decided that we don't need that
trace cut. So on few boards, our CM told us that they can fix the trace by
putting a small trace across the cut out and soldered the ends. Also, put
some kind of solder masking on top of that soldered traces. Is it
acceptable? Any comments from experience folks. Or should I go for real
jumper wire.

re,
ken patel

----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

ATOM RSS1 RSS2