TECHNET Archives

February 2001

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Steve Telgen <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Wed, 21 Feb 2001 11:40:42 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (50 lines)
With a reasonably competent operator and well-maintained spindles, you
should able to +/-.005 easily.  We do all the time, actually, it's our
default when no tolerance is supplied.

-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of John Parsons
Sent: Wednesday, February 21, 2001 11:16
To: [log in to unmask]
Subject: Re: [TN] FAB - Reality Check, Tooling Holes and Profiling


Steve,

And with pinless routs you are having no problems maintaining the
+/- 0.005" tolerances seen on many of todays fab drawings?  Or do
you not see tolerances spec'd this tight?

Regards
John Parsons

> John, we use pinless routing with '80s vintage Excellon Mark IV's.  A lot
of
> today's designs don't leave a lot of room for additional tooling, and
> pinless saves on set-ups.

----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

ATOM RSS1 RSS2