Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Tue, 13 Feb 2001 13:42:03 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Scott,
Another option that we use and like is the use of a high-temperature
aluminum tape. I believe it gives better heat transfer than kapton or glue
while being less of a hassle than solder or adhesive. We use a product that
KIC markets (www.kicthermal.com) but I'm sure there are probably others.
One caveat; some tapes we tried didn't hold up to reflow temperatures so
you'd want to test them.
Rick Thompson
Ventura Electronics Assembly
2655 Park Center Dr.
Simi Valley, CA 93065
+1 (805) 584-9858 x-304 voice
+1 (805) 584-1529 fax
[log in to unmask]
-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Rougeux, Scott
Sent: Tuesday, February 13, 2001 10:36 AM
To: [log in to unmask]
Subject: [TN] Thermal profiles at Wave Solder
Good Afternoon,
When profiling assemblies at wave solder what is the preferred method for
attachment of thermocouples?
Glue
Kapton tape
Thermal conductive adhesives
High temp solder
Destructive - Thermocouple embedded in PCB
Just curious on some of the answers I may receive........
Thanks in Advance
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|