Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Tue, 6 Feb 2001 13:53:05 -0600 |
Content-Type: | multipart/mixed |
Parts/Attachments: |
|
|
I agree. I read the posts regarding this issue before but never posted a response. I have heard, seen, and/or lived through issues regarding the fracture but not corrosion on the lead ends.
Kathy
>>> [log in to unmask] 02/06/01 01:23PM >>>
Bob,
I would be more concerned with a fractured joint after trimming than corrosion.
My .02.
Rick
-----Original Message-----
From: Bob Arciolla [mailto:[log in to unmask]]
Sent: Tuesday, February 06, 2001 11:29 AM
To: [log in to unmask]
Subject: [TN] fractured joints
About two weeks ago I questioned whether clipping leads (and possible fractured joints) was a problem if there was a good fillet on the component side of the board. The main input I received back is that there is a chance of corrousion to the leads. Last week I asked if this would still be a problem if the PCB was totally encapsulated and a vacuum pulled on the units. Any input?????
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META content="MSHTML 5.00.2614.3500" name=GENERATOR></HEAD>
<BODY style="FONT: 8pt Arial; MARGIN-LEFT: 2px; MARGIN-TOP: 2px">
<DIV><FONT size=1>I agree. I read the posts regarding this issue before
but never posted a response. I have heard, seen, and/or lived through
issues regarding the fracture but not corrosion on the lead ends.
</FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=1>Kathy</FONT><BR><BR>>>> [log in to unmask]
02/06/01 01:23PM >>><BR></DIV>
<DIV><FONT color=#0000ff face=Arial size=2><SPAN
class=770411919-06022001>Bob,</SPAN></FONT></DIV>
<DIV><FONT color=#0000ff face=Arial size=2><SPAN class=770411919-06022001>I
would be more concerned with a fractured joint after trimming than
corrosion.</SPAN></FONT></DIV>
<DIV><FONT color=#0000ff face=Arial size=2><SPAN class=770411919-06022001>My
.02.</SPAN></FONT></DIV>
<DIV><FONT color=#0000ff face=Arial size=2><SPAN
class=770411919-06022001>Rick</SPAN></FONT></DIV>
<BLOCKQUOTE style="MARGIN-RIGHT: 0px">
<DIV align=left class=OutlookMessageHeader dir=ltr><FONT face=Tahoma
size=2>-----Original Message-----<BR><B>From:</B> Bob Arciolla
[mailto:[log in to unmask]]<BR><B>Sent:</B> Tuesday, February 06, 2001
11:29 AM<BR><B>To:</B> [log in to unmask]<BR><B>Subject:</B> [TN] fractured
joints<BR><BR></DIV></FONT>
<DIV><FONT color=#000000 size=2>About two weeks ago I questioned whether
clipping leads (and possible fractured joints) was a problem if there was a
good fillet on the component side of the board. The main input I received back
is that there is a chance of corrousion to the leads. Last week I asked if
this would still be a problem if the PCB was totally encapsulated and a vacuum
pulled on the units. Any input?????</FONT></DIV></BLOCKQUOTE></BODY></HTML>
|
|
|