Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 7 Feb 2001 16:42:17 EST |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Immersion White Tin
Repeated thermal excursions cause a growth of the intermetalic layer. If your
PWB fabricator increases the tin thickness, the intermetalic effect on
solderability diminishes.
Although the immersion process is self-limiting it can be biased to the
"high" or thicker side by increased bath concentration, dwell and/or
temperature. A reliable reference on these parameters (in the US) is Florida
CirTek (Greely, CO).
Also, make sure your PWB fabricator is applying the white tin at the end of
the process. If the tin is applied BEFORE silk screen cure, the cure process
can artificially cause a dry-age acceleration, promoting intermetalic growth
before you even get the product.
Cheers -
Bob Lazzara
Marketing & Tech Support
Circuit Connect, Inc.
+1 706.245.4232
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|