Hi Barbara
Made in U.S.A. should be visible when unit is assembled, if possible.
It is my understanding that we place periods between USA
when we state Made in U.S.A. to eliminate confusion.
Someone told me once, there is a Swiss company named USA.
Is this so ? ?
Good Luck
-----Original Message-----
From: Barbara Burcham [mailto:[log in to unmask]]
Sent: Monday, February 05, 2001 10:39 PM
To: [log in to unmask]
Subject: Re: [TN] Looking for copy right marking info
on the PCBs
Does it matter where the Made in U.S.A. is placed and are
the periods
(U.S.A.) of any significance?
Barbara
-----Original Message-----
From: Roger M. Stoops
[mailto:[log in to unmask]]
Sent: Monday, February 05, 2001 3:33 PM
To: [log in to unmask]
Subject: Re: [TN] Looking for copy right marking info on the
PCBs
Ken,
Did you ever get a response?
Here's my $0.02:
The minimum required marking would be the copyright symbol
("c" with a
circle"), the date (year), and the company name. Where
space is not
critical, you can put "COPYRIGHT" in front of the copyright
symbol.
Remember the copyright only protects how the board looks,
not the circuit
design itself (in the USA, may or may not apply the same in
other
countries).
As far as country of origin, all you need is "Made in
U.S.A." This is only
for products that are shipped outside of the USA, and where
the board
assembly itself would be returned, to make it easier to get
such an
assembly back through US Customs. If the board is an
integral part of
another assembly, the note would not be needed.
Roger M. Stoops, C.I.D., PCB Designer
Trimble
Engineering and Construction Division
5475 Kellenburger Rd.
Dayton, OH 45424-1099 USA
Ph: +01 937.233.8921 or +01 937.233.4574 ext 288
Fax: +01 937.233.7511
Ken Patel
<KPatel@ZAFFI To:
[log in to unmask]
RE.COM> cc:
Sent by: Subject: [TN]
Looking for copy
right marking info on the PCBs
TechNet
<[log in to unmask]
ORG>
01/19/01
05:02 PM
Please
respond to
"TechNet
E-Mail
Forum.";
Please
respond to
Ken Patel
Guys,
Can someone throw some lights on what kind of copy right
marking are being
applied on the PCBs? Also, anything on country of origin
requirements.
re,
ken patel
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using
LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with
following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following
message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources
& Databases >
E-mail Archives
Please visit IPC web site
(http://www.ipc.org/html/forum.htm) for
additional
information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using
LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with
following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following
message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources
& Databases >
E-mail Archives
Please visit IPC web site
(http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using
LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with
following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following
message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources
& Databases > E-mail Archives
Please visit IPC web site
(http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
----------------------------------------------------------------------------
-----
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
