Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Mon, 12 Feb 2001 10:07:24 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Robert,
I understand that once soldered, the solder pads on an IWT board will be
alloyed. What about any traces or ground planes which are not covered with
solder mask? These locations would not get solder coated, therefore would
remain IWT. Wouldn't there be a concern of tin whisker growth over time in
the field?
Jim Marsico
Senior Engineer
Production Engineering
AIL/Electronics Systems Group
An EDO Company
[log in to unmask] <mailto:[log in to unmask]>
-----Original Message-----
From: [log in to unmask] [SMTP:[log in to unmask]]
Sent: Monday, February 12, 2001 9:20 AM
To: [log in to unmask]; [log in to unmask]
Subject: Re: [TN] more about white tin
In a message dated 2/12/01 8:07:09 AM, [log in to unmask]
writes:
JAMES: If immersion tin does whisker, wouldn't exposed traces (not
solder
pads) be
a concern even after assembly?
ROBERT: In my experiences tin "whiskering" of nonporous immersion
white tin
(IWT) ceases to be a theoretical possibility after assembly, as the
greater
mass of the solder alloy provided at assembly displaces the IWT. You
can't
find the IWT after proper assembly -- including pad edges -- as the
matte
nature of the IWT promotes whole-pad wetting (unlike OSP).
JAMES: Is whisker growth a function of the environment or just time?
ROBERT: In the case of IWT (versus electroplated tin), "whiskering"
exists
only as a theoretical possibility. Search the TechNet archives (and
anywhere
else); I assure you that you'll find not a single complaint about
nonporous
immersion white tin whiskering, irrespective of time or environment.
JAMES: Could the tin in the immersion tin process be alloyed (with a
small
percent of something else) to prevent whisker growth?
ROBERT: Whether you assemble with tin/lead, tin/silver, tin/bismuth
or tin
kryptonite, the IWT is alloyed by a large percentage of something
else upon
assembly. You've got a greater likelihood that the tin from your
assembly
solder will "whisker", but I'll leave that aspect to the abundant
solder
experts.
- Robert Lazzara
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|