Hm..squashed pancakes...hourglass...circular...rectangular...why do we then call them solder balls at all? Have another q to guru W. Just now with head into something I regret taking in. To make long story shortest possible: have you any experience from Ni3Sn4-layers distinguish between static force withstanding, like shear or pull, and on the other hand dynamic impacts, like shockwave and vibration. Could hang a man glued to the BGA but didn't like tapping the PWB against table. Crystal is known for this, very, very strong and stabile in a way but may explode when touched different. Like women.
Ingemar
-----Original Message-----
From: Werner Engelmaier [mailto:[log in to unmask]]
Sent: den 3 januari 2001 03:24
To: [log in to unmask]
Subject: Re: [TN] (TN) Why solder balls on a BGA
Hi ?,
>I have heard that solid solder balls offer better reliability on an area
array device (BGA) >than a plated stamped lead. If true, what are the reasons?
Not very likely, those leads would have to be very stiff to make this true.
>Another question, are the solder balls on a BGA supposed to reflow and lose
their >spherical shape? Or are they supposed to stay round after reflow with
the substrate >pad and solder paste?
It depends. High-melt solder balls will not reflow and therefore remain
spherical; near-eutectic solder balls wil reflow and depending on component
weight and orientation, pad sizes and geometries, solder volume and surface
tension, assume geometries other than the original one. These geometries can
vary from a squashed pancake to an hourglass, circular to rectangular in
cross-section.
Werner Engelmaier
Engelmaier Associates, L.C.
Electronic Packaging, Interconnection and Reliability Consulting
7 Jasmine Run
Ormond Beach, FL 32174 USA
Phone: 904-437-8747, Fax: 904-437-8737
E-mail: [log in to unmask], Website: www.engelmaier.com
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
