We used brass foil (like a stencil).  The foil was etched creating apertures
for the components which were a concern and the polarity marking was etched
right in the foil as well.  Hope this helps.
Thanks,
Jim Marsico
EDO Electronic Systems Group
[log in to unmask] <mailto:[log in to unmask]>


        -----Original Message-----
        From:   Edwards, Ted A (AZ75) [SMTP:[log in to unmask]]
        Sent:   Wednesday, January 17, 2001 6:43 PM
        To:     [log in to unmask]
        Subject:        [TN] Assembly Overlay

        Am looking for suggestions on an antistatic plastic film to be used
as an
        overlay in a printed circuit board assembly operation.  Needs to be
        something that can be printed or marked with things like correct
part
        orientation to use to check whether the parts are on the circuit
assembly
        correctly.


----------------------------------------------------------------------------
-----
        Technet Mail List provided as a free service by IPC using LISTSERV
1.8d
        To unsubscribe, send a message to [log in to unmask] with following
text in
        the BODY (NOT the subject field): SIGNOFF Technet
        To temporarily halt delivery of Technet send the following message:
SET Technet NOMAIL
        Search previous postings at: www.ipc.org > On-Line Resources &
Databases > E-mail Archives
        Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
        information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315

----------------------------------------------------------------------------
-----

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------