TECHNET Archives

January 2001

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Phil Nutting <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Wed, 17 Jan 2001 08:21:21 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (49 lines)
We use two methods.

1) peelable solder mask Techspray Wondermask P

2) holes with no plating through and about a 10 mil ring of no copper on the
inside diameter of the land.

-----Original Message-----
From: Ken Fong [mailto:[log in to unmask]]
Sent: Wednesday, January 17, 2001 12:48 AM
To: [log in to unmask]
Subject: [TN] Special through hole pad design


Technetters,
Could anyone advise a design of soldering pad which will not be closed with
solder during wavesoldering when the hole is not inserted with component,
but it
can form a normal solder joint when a component is inserted through the hole
with the lead clinched by auto-insertion machine? The board is 1.6mm thick
single sided pcb. Thanks.

Ken

----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

ATOM RSS1 RSS2