In a message dated 01/11/2001 9:49:00 AM Central Standard Time,
[log in to unmask] writes:

> Steve,
>
>  Ina very past life we produced a product similar.  We were able to control
> the solder running and maintain the solder tension at the pad site by
having
> the trace necked down considerably (bare minimum width) to force and create
> as large a solder dam as possible.
>
>  Kathy

Hi Kathy!

It looks like they've done that with some of the pads but not with all of
them. You can see what I mean by looking at a picture I've taken of a section
of the PCB. Go to:

http://www.driveway.com/share?sid=4eced0a4.94f42&name=Pictures&view=3

There you'll see the footprint for 4 components, a large cap, two 1206 parts,
and a 0805 part. I'm not sure if they necked down the traces to help with
soldering, but I still think I'm going to have a lot of problems if I try to
print paste and reflow...don't you?

Thanks!

-Steve Gregory-

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------