Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Fri, 5 Jan 2001 08:02:35 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Search on "score" in the archives. http://www.ipc.org/html/fsresources.htm
You will find a great deal of discussion on V groove. The long and short of
it: It's not the depth of the groove but the material that remains . . .
about 0.015" for FR4 and 0.062" thick boards. There is discussion of other
materials and other thickness as well.
Guy Ramsey
American Competitiveness Institute
Senior Lab Technician / Instructor
610 362-1200 ext 107
-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Ketan Bhatt
Sent: Friday, January 05, 2001 2:29 AM
To: [log in to unmask]
Subject: [TN] V-groove dimessions.
Hi TechNetters !!
We have a requirements of making a panel of multiple PCBs (2 / 4 / 6) for
mounting efficiency. Our board size is typically 3" x 4" and 4" x 4".
What is the various methods of making panel w/o increasing the PCB cost ? PL
also mention the comparative advantages of using 'v' groove. And in case of
using 'V' groove, what should be the dimensions of the groove ?
Best regards,
Ketan Bhatt
Secure Meters Limited,
India.
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|