Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 24 Jan 2001 18:59:09 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Tony,
I believe you may have more problems than coating pumping/CTE. If you completely fill the gap
under the BGA it is reasonable to assume that that coating will not completely cure
(not enough exposure to air). Also, if you don't draw a partial vacume during cure
you can trap air under the BGA. This combination can create all sorts of problems.
D. A. Douthit
Tony Whitfort wrote:
> We are dip coating a product with a BGA part on it.
>
> I am concerned that the coating under the BGA may cause reliability
> problems due to thermal expansion.
>
> We are using a silicon based coating and the BGA part is a standard
> 1.27mm pitch.
>
> Can anyone point me to some literature on this.
>
> ---------------------------------------------------------------------------------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
> Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
> ---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|