Ingemar,
Now, I have more info on the connector, it's a high frequency connector made
by Rosenberger in Germany and their part number is 32K243-40M D3. This one
is new part coming out of them and North American Sales do not have more
info on that.
Are you talking about hand soldering? or regular reflow soldering. So, the
parts you were using were coming with backfilled epoxy or something you used
to prevent from getting inside. Any problem going thru DI water wash?
re,
ken patel
-----Original Message-----
From: Ingemar Hernefjord (EMW)
[mailto:[log in to unmask]]
Sent: Thursday, January 18, 2001 12:03 AM
To: [log in to unmask]
Subject: Re: [TN] Can RF connectors be reflowed?
we have been soldering RFcons for years. Of course follow con maker's
instructions. Advice: see that no flux or solder creeps on inside. We had to
buy specials with backfilled epoxy that stopped inside disaster.
Ingemar
-----Original Message-----
From: Phil Crepeau [mailto:[log in to unmask]]
Sent: den 17 januari 2001 22:15
To: [log in to unmask]
Subject: Re: [TN] Can RF connectors be reflowed?
hi,
there are a multitude of rf connectors? specifically, what type are you
talking about?
a common practice (for example with semi-rigid cable) is to cut the cable to
length, preheat the cable to expand and relieve the teflon dielectric, cut
off the teflon that extrudes from the shield, then solder the connector to
it. i know you are talking about the connector, but the same prodedure
could work there. we reflow solder sma connectors to backpanels without any
problems.
phil
-----Original Message-----
From: Ken Patel [mailto:[log in to unmask]]
Sent: Wednesday, January 17, 2001 12:43 PM
To: [log in to unmask]
Subject: Re: [TN] Can RF connectors be reflowed?
Importance: High
Guys,
How RF connectors are soldered to the boards? This one is with teflon bead
for sure.
re,
ken patel
-----Original Message-----
From: Terveen, James @ NARDAEAST
[mailto:[log in to unmask]]
Sent: Wednesday, January 17, 2001 12:31 PM
To: 'TechNet E-Mail Forum.'; 'Ken Patel'
Subject: RE: [TN] Can RF connectors be reflowed?
You may have a problem with the teflon bead in the connector, grow as it
sees the heat during reflow and that may (no it probably will effect the
performance of the connector.
-----Original Message-----
From: Ken Patel [mailto:[log in to unmask]]
Sent: Wednesday, January 17, 2001 2:41 PM
To: [log in to unmask]
Subject: [TN] Can RF connectors be reflowed?
Importance: High
All,
I am throwing this as a general question.
Can RF connectors be reflowed? This one is high frequency. We do not have
data sheet and are made in Germany.
re,
ken patel
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|