In a message dated 1/24/01 5:34:15 PM Central Standard Time,
[log in to unmask] writes:
<< I need to place 16 QFP168 with 16mil pitch leads on the bottom side.
I will am going to reflow both top and bottom.
I feel that there should be enough surface tension to hold the parts onto
the bottom, but
I thought I would get some confirmation on this.
Thanks
Scott >>
Hi Scott!
You should be okay as long as it's not a ceramic part, or something with a
heat-sink that adds a lot of weight, just a question, what's on the top?
-Steve Gregory-
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------