And are the fibers going to get into connectors or something that will cause
intermittent opens?
Steve Bakke

        ----------
        From:  John Perry [SMTP:[log in to unmask]]
        Sent:  Tuesday, January 23, 2001 3:16 PM
        To:  [log in to unmask]
        Subject:  [IPC-600-6012] Nonconforming Condition for Nonmetallic
Burrs?

        Hi All,


        Got an issue here raised by one of our IPC-A-600F users.  The
attached .pdf contains a photograph that shows the board edge of a sample
which the user believes does not pass the criteria established in section
2.1.1.1., Nonmetallic Burrs.  It would appear as though the router had some
problems on the edges and fiberglass fibers are now falling off the edges.

        Does this provide sufficient information in order to obtain a
consensus from this group on the pass/fail issue?


        Best Regards,




        John Perry
        Technical Project Manager
        IPC
        2215 Sanders Road
        Northbrook, Il 60062
        1-847-790-5318 (P)
        1-847-509-9798 (F)
        [log in to unmask]
        <<File: Loose f1.pdf>>