TECHNET Archives

December 2000

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Reply To:
TechNet E-Mail Forum.
Date:
Thu, 21 Dec 2000 12:21:48 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (31 lines)
I have some boards that are coated with acrylic conformal coating. We have
to do a few chip replacements. The coating will be selectively stripped
around the chips and the rework performed. Is there a problem with sending a
coated board through an in-line aqueous cleaner? I am running just water at
130 degrees F. Will the pressure damage the coating? Will the water
recycling system become contaminated? Do I have to strip the board
completely prior to rework to avoid any problems?

Thanks for your help.


Bob


Robert Barr
Manufacturing Engineering
Formation, Inc.
Voice: 856-234-5020 x3035
Fax: 856-234-6679
email: [log in to unmask]

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

ATOM RSS1 RSS2