Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 21 Dec 2000 05:26:29 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I think that really depends on who's system you are
using. I know the Asymtek system has very good edge
definition and masking is not needed. The Trimode
swirl head gives the ability to define your edges and
then fill them with a spray coat. You should be able
to eliminate masking.
Brad
--- Jon Moore <[log in to unmask]> wrote:
> In a message dated 12/18/2000 6:26:32 PM US Eastern
> Standard Time,
> [log in to unmask] writes:
>
> << Please, selective robotic coating does NOT
> eliminate masking - maybe you
> are
> the lucky one, ask others who have such systems. >>
>
> I will agree that it is design dependent. I have
> put in selective coating on
> several production lines that have totally
> eliminated masking, and some that
> have greatly reduced but not eliminated. With
> proper DFM work, elimination
> is actually quite easy.
>
> Jon Moore
>
>
---------------------------------------------------------------------------------
> Technet Mail List provided as a free service by IPC
> using LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask]
> with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt delivery of Technet send the
> following message: SET Technet NOMAIL
> Search previous postings at: www.ipc.org > On-Line
> Resources & Databases > E-mail Archives
> Please visit IPC web site
> (http://www.ipc.org/html/forum.htm) for additional
> information, or contact Keach Sasamori at
> [log in to unmask] or 847-509-9700 ext.5315
>
---------------------------------------------------------------------------------
__________________________________________________
Do You Yahoo!?
Yahoo! Shopping - Thousands of Stores. Millions of Products.
http://shopping.yahoo.com/
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|