Good job, I cleared it up a little, see bellow.
> ----------
> From: Hans Shin[SMTP:[log in to unmask]]
> Sent: Thursday, December 21, 2000 9:38 AM
> To: [log in to unmask]
> Subject: [TN] RE: [TN] PRESIÓN DE VACÍO
>
> I think this is what Fernando may have written:
>
> "need to know, what is the recommended value of vacum pressure in an
> insulated system (ORC, DUPON, etc.) if crystal/crystal is used. We are
> working on a value of approximately 60 cm/Hg.
>
> Thank you."
>
> I hope I translated it right.
>
> Hans Shin
> Pacific Testing Laboratories, Inc.
> http://www.pacifictesting.com/
>
> -----Original Message-----
> From: Angel Pulido [SMTP:[log in to unmask]]
> Sent: Thursday, December 21, 2000 9:23 AM
> To: [log in to unmask]
> Subject: [TN] RE: [TN] PRESIÓN DE VACÍO
>
> English please, we do not understand that...
>
> thanks.
>
> -----Original Message-----
> From: Fernando Gómez [mailto:[log in to unmask]]
> Sent: Thursday, December 21, 2000 11:06 AM
> To: [log in to unmask]
> Subject: [TN] PRESIÓN DE VACÍO
>
>
>
>
> NECESITARÍA SABER, CUAL ES EL VALOR RECOMENDADO DE
> PRESIÓN
> DE VACÍO, EN UN
> SISTEMA DE INSOLADO (ORC, DUPONT etc.), SI SE USA
> CRISTAL/CRISTAL.
> AGRADECERÍA ESTA INFORMACIÓN.
> NOSOTROS ESTAMOS TRABAJANDO A UN VALOR APROXIMADO DE 60
> cm/Hg.
>
> GRACIAS.
>
> --------------------------------------------------------------------------
> -------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt delivery of Technet send the following message: SET
> Technet NOMAIL
> Search previous postings at: www.ipc.org > On-Line Resources & Databases >
> E-mail Archives
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
> ext.5315
> --------------------------------------------------------------------------
> -------
>
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|