Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 21 Dec 2000 09:38:16 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I think this is what Fernando may have written:
"need to know, what is the recommended value of pressure mold/casting, in an insulated system...if crystal is used/I would be obliged to use this information. We are working on a mold approximately 60 cm/Hg.
Thank you."
I hope I translated it right.
Hans Shin
Pacific Testing Laboratories, Inc.
http://www.pacifictesting.com/
-----Original Message-----
From: Angel Pulido [SMTP:[log in to unmask]]
Sent: Thursday, December 21, 2000 9:23 AM
To: [log in to unmask]
Subject: [TN] RE: [TN] PRESIÓN DE VACÍO
English please, we do not understand that...
thanks.
-----Original Message-----
From: Fernando Gómez [mailto:[log in to unmask]]
Sent: Thursday, December 21, 2000 11:06 AM
To: [log in to unmask]
Subject: [TN] PRESIÓN DE VACÍO
NECESITARÍA SABER, CUAL ES EL VALOR RECOMENDADO DE PRESIÓN
DE VACÍO, EN UN
SISTEMA DE INSOLADO (ORC, DUPONT etc.), SI SE USA
CRISTAL/CRISTAL.
AGRADECERÍA ESTA INFORMACIÓN.
NOSOTROS ESTAMOS TRABAJANDO A UN VALOR APROXIMADO DE 60
cm/Hg.
GRACIAS.
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|