TECHNET Archives

November 2000

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Francis Sun <[log in to unmask]>
Reply To:
Date:
Tue, 7 Nov 2000 17:14:56 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (48 lines)
Be careful of that type of separators. In our case, we found that the bodies
of chip caps about 0.20 inches from the edges were cracked due to the
displacement of the fr4 material as the blades travels along the score line.
If your components are 'far' away from the edge it may be fine.
Try before you buy. Perform your evaluation and tests.

-----Original Message-----
From:   TechNet [mailto:[log in to unmask]] On Behalf Of Trevor Goddard
Sent:   Tuesday, November 07, 2000 10:41 AM
To:     [log in to unmask]
Subject:        [TN] PCB Separating Equipment

Hi All
 Does anyone out there use a CAB PCB Separator to depanelize V-scored
boards? If so does anyone have a contact for the CAB company or supplier?
Actually if anyone has  contacts for any other depanelizing equipment it
would also be appreciated.
Thanks


Trevor Goddard,
SMT Supervisor
XLTEK
(905) 829-5300 x 348
[log in to unmask] <mailto:[log in to unmask]>

----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

ATOM RSS1 RSS2